Looks good Steve.
I like the bottom drain plug(inc. magnet?) and the high level filler plug with dip stick.
Makes for quick and easy oil changes.
Cheers
Ian W.
Printable View
Looks good Steve.
I like the bottom drain plug(inc. magnet?) and the high level filler plug with dip stick.
Makes for quick and easy oil changes.
Cheers
Ian W.
Drain plug and filler dipstick both have magnets on them, I was quite surprised, it's quit an accurate copy of the ARB diff cover although it isn't powder coated like the ARB one ;)
Cheers
Steve
Finally fitted the diff cover. Fits well and no leaks :)
http://i218.photobucket.com/albums/c...psxn7agc4k.jpg
Cheers
Steve
But where's the bottle opener
Fitted a tailgate strut, sick of holding the thing open.
Used three roofing screws at the body end as the self tappers weren't getting though the metal, double skinned I think.
http://i218.photobucket.com/albums/c...ps1eca3e06.jpg
And closed
http://i218.photobucket.com/albums/c...pscfc1a5e1.jpg
Took a little tweaking to make sure the strut was not stopping the tailgate before it hit the stops.
https://www.youtube.com/watch?v=AXzc3aPQFlY
Cheers
Steve
That should have been the first mod, B4 the lift even
Sent from my iPad using Tapatalk
I just fitted one 3 weeks ago! Watch out opening it when the arse end is downhill and you forget you've fitted it!:hopelessness:
Catches you off guard!! LOL
Raised the light bar up to the top of the front bar and took the Narva 175 lights (with HID conversion) off of the XJ and put them on to the JK :) Also took the rear LED work light off the XJ and will mount up as a reversing light on the JK once I get the roof rack (off to see Wooders tomorrow)
http://i218.photobucket.com/albums/c...pspkjryo23.jpg
Cheers
Steve
Remembered why I was never a big fan of the HIDS (warm up time) so took them off and put on some LED spots in there place :)
5" spots from ebay, 45w and 10 degree spread as I wanted something that would push most of the light forward to compliment the flood light bar. Not looking to light up KM ahead just something to get a but more distance. Quality seems good with an aluminium housing and a stainless components with a decent waterproof grommet for the cables. The mounting system also makes it very easy to get them level.
http://i218.photobucket.com/albums/c...ps58d1ci45.jpg
One of each, they sit further back and are more protected.
http://i218.photobucket.com/albums/c...pslfrvns8c.jpg
http://i218.photobucket.com/albums/c...ps0wzntrjw.jpg
On a "pain to look at directly" threshhold they are up there.
http://i218.photobucket.com/albums/c...psair58yp4.jpg
Now to wire them up over the weekend :)
http://i218.photobucket.com/albums/c...pssfugcpn8.jpg
Cheers
Steve
Can you share an eBay link Steve?
rich