PDA

View Full Version : Vehicle Reader



Hitesh
18-04-18, 11:00 PM
Hi all - trying to get some recommendations on reader / app combinations. My 2013 JKU doesn’t have any transmission temp data in the dash cluster.

Thanks

Hitesh


Sent from my iPhone using Tapatalk

Milky
19-04-18, 10:05 AM
I use an OBDlink MX for my 2013 JKU combined with the Torque app for Android.
It's one of the more costly OBD tools out there but is very responsive and supports Ford/GM vehicles :smile-new:

SnakeDoctor
19-04-18, 10:41 AM
I've got Torque App for Android + Konwei 902 bluetooth (generic cheap product) adaptor.

Jeep11
19-04-18, 08:12 PM
I use the Diablo reader, very happy with it

Hayesio
24-04-18, 09:03 PM
As a scan tool, Bluedriver is excellent for jeeps, about $130 on Amazon, app is free. It can interrogate all modules on the JK, ECU, ABS, TIPM etc. For monitoring PID's Torque is good, in conjunction with a generic interface, but generally limited to ECU PID's. I'm not sure if the auto has a separate controller for the transmission or whether trans control is by the ECU. Also not sure if the hardware exists for trans temp PID monitoring. I'd suggest searching ausjeep or US forums, there'd be a plethora of information there on the topic.

Jack

Hitesh
25-04-18, 11:48 AM
As a scan tool, Bluedriver is excellent for jeeps, about $130 on Amazon, app is free. It can interrogate all modules on the JK, ECU, ABS, TIPM etc. For monitoring PID's Torque is good, in conjunction with a generic interface, but generally limited to ECU PID's. I'm not sure if the auto has a separate controller for the transmission or whether trans control is by the ECU. Also not sure if the hardware exists for trans temp PID monitoring. I'd suggest searching ausjeep or US forums, there'd be a plethora of information there on the topic.

Jack

Thanks I have ordered a unit off amazon and will share what it can do or can’t.


Sent from my iPhone using Tapatalk

Steve F
27-04-18, 10:39 AM
You will need to setup a custom PID in Torque for the trans temp, and it will only work in D or R, put it in park and it will report the coolant temp instead of the trans temp. Have a google as I don't have the custom PID settings for the 3.6 only for the 3.8.

I just use one of these with torque and have a 7" tablet mounted to my dash for GPS and occasionally fire up torque to check temps etc.

https://www.ebay.com.au/itm/2017-Mini-Auto-Car-ELM327-OBD2-ODBII-CAN-Bluetooth-Scanner-Tool-Torque-Android/152575250443?epid=2232038960&hash=item238631900b:g:eOMAAOSw03lY46Qs

Cheers
Steve

Hitesh
27-04-18, 02:13 PM
You will need to setup a custom PID in Torque for the trans temp, and it will only work in D or R, put it in park and it will report the coolant temp instead of the trans temp. Have a google as I don't have the custom PID settings for the 3.6 only for the 3.8.

I just use one of these with torque and have a 7" tablet mounted to my dash for GPS and occasionally fire up torque to check temps etc.

https://www.ebay.com.au/itm/2017-Mini-Auto-Car-ELM327-OBD2-ODBII-CAN-Bluetooth-Scanner-Tool-Torque-Android/152575250443?epid=2232038960&hash=item238631900b:g:eOMAAOSw03lY46Qs

Cheers
Steve

Cheers


Sent from my iPhone using Tapatalk