View Full Version : Tool Box Day - 11 th May 2013
SJC Tool Box days are an open invitation (http://www.sydneyjeepclub.com/#) to all members to do some wrenching on your Jeep or to help out someone else.
To be held at 4 Leighton Place Hornsby
From 9am till we finish ;)
So anyone got anything they'd like to add to the Job List (http://www.sydneyjeepclub.com/#)
Paul-JK
10-04-13, 10:36 AM
I'm in. Still got a couple more ball joints and uni's to look at. I'll try and not make mine last all day this time so someone else can get a go as well :smile-new:
Upper front arms, fix sagging roof lining, rear centre break light, reverse lights, replace missing bolt in left hand rear wheel cylinder & degrease engine on XJ.
Install axle to XJ camper.
Wooders
10-04-13, 01:35 PM
I'd like to add the Car trailer build or the wife's CJ8 engine swap - but that might be a little selfish ;)
So I'll suggest the BBQ Trailer ....as a low priority...
CJ 8 as classic not plastic is coming
If Wooders gets the Novak shifter in, that would be a good one for me.
The upper (sliding window) doors ive got on order might be a bit too much for me though :smile:.
I wouldn't mind just being there and helping at this stage. Paul, ball joints and UJs is what I will be doing next - so I would like to see it done before doing mine. I have not decided if I will just pay to get it sorted. Parts already sitting on the shelf waiting. Synergy BJs, UJs and axel seals. Did the right side turbo hose a couple of weeks back and wanted to make the order (freight) worth it, so I ordered the other parts at the same time.
Paul-JK
10-04-13, 09:22 PM
I wouldn't mind just being there and helping at this stage. Paul, ball joints and UJs is what I will be doing next - so I would like to see it done before doing mine. I have not decided if I will just pay to get it sorted. Parts already sitting on the shelf waiting. Synergy BJs, UJs and axel seals. Did the right side turbo hose a couple of weeks back and wanted to make the order (freight) worth it, so I ordered the other parts at the same time.
I'm not quite claiming to be an expert yet but the ball joints aren't difficult. Dave's got the kit to do them so better to come along and do them on the tool box day. At least you know they're done right. The worst part is pulling the axles to get at them, or rather the worst part is putting the axle back in, but after our learnings from last week doing mine it should be a doddle now. If you've got the axle out you might as well do the uni's while it's out. The one we did last week on mine was a pig but everyone assures me they're not usually like that and should only take 10 minutes when the axle is out.
Wooders
11-04-13, 06:33 AM
DK
Novak & sliders have arrived - I just hadn't 5 min free to call.
Cheers Dave
Sent from my GT-N7105T using Tapatalk 2
i may come and drink someone elses beer while anyone who wants to change the bushes in the control arms in my car wants to have a crack........
what grease should i be buying to put them in?
i may come and drink someone elses beer while anyone who wants to change the bushes in the control arms in my car wants to have a crack........
what grease should i be buying to put them in?
KY...................................
can you still get it in the 44 gallon drums you were offering at jambo in melb?
was that before or after you became president?
If my jeep is ready fingers crossed, hopefully I've got some spare time to come down and have a look, can get my zj front hooks and put them in
I thought that was your special stash
KY...................................
Is that true?
redrubi
12-04-13, 07:13 PM
Ask this Guy!!2104
Sign me up this time - happy to help out and check out the possibilities of the Protofab rear bar for the Waggie. (Quite possibly I am dreaming.)
I'll definitely be there - just tried putting in those disconnects and had a bugger of a time even getting the top post provided in the kit through the sway bar hole - methinks i'll need more qualified supervision with these :/ (plus have run out of down time until after my next exam)
Will2003tj
19-04-13, 10:02 AM
I should be there to help out... last one was good fun
I have an email from new member Robert Scott, who is having some problem connecting to forum .... he wishes to add his name to the list of jobs as he needs help and advice with his JK
Maggie.
Wooders
05-05-13, 10:24 PM
No problem Maggie.
So that means so far was have:
98ZJ: ZJ Tow Hooks
DanD: Swaybar discos
DK: Novak Shifters
DLE068: JK High Steer
Hunno: XJ prep
Paul-JK: Ball Joints & Axle Uni/
Reyzor: JK CA Bushes
RobScott JK: not sure what job yet.
Wolfie: Camper (Surely you'll have finished the ZJ by then ;))
Any others??
Willing helpers:
Jbrad
Rok360
Will
Naturally you don't need to "register" to attend, so if your Saturday is looking a little quite come-along.
Wooders
06-05-13, 10:24 AM
Also we'll have the BBQ running. Thinking about healthy ;) B&E rolls in the morning and usual snag sangers for lunch.
Will also have beverages available.
But in a slight change from previous "events", due to club fund raising, there will be a nominal cost of $2 each. So bring your change, your jeep and lets have a great day.
Lastly remember the ToolBox day will lead into the Movie Night - so hang around!!
You're a Good Man Wooders
Wooders
06-05-13, 11:03 AM
You dropping in Steve??
Also do we have anyone prepared to volunteer for cooking duties?
I will try to turn up Dave. but my white knight is running sooooo smooooth ... (so far) though it still feels as if it's pulling a little left. - can't see why....but I accept it that way
I can help cook if you wish but will confirm if I'm free.
Steve
may have to pull out of this one....... work stuff
Paul-JK
06-05-13, 11:48 AM
Hey Dave,
Looking forward to it. After what I learned last time I should have it down to a fine art this time......it'll be like an F1 pit crew! You do still have that old tent pole handy for retrieving those damn axle guide/washer things don't you? Lesson learned......there should be 2!
Forecast's looking better than last time as well which is a bonus.
redrubi
06-05-13, 11:30 PM
Rock Sliders??? Mr Wooders:grumpy:
Rock Sliders??? Mr Wooders:grumpy:
Yeah...... what he said :hopelessness:
Have had further word from Robert Scott ... he has ordered his bulbar from TJM but won't be delivered in time .... however I have suggested he call in to meet you guys and get further advice.
I might be popping in. I don't need nothing done, but always good for a chin wag and a hand. Won't be in till around midday as I work in the morning.
Wally
Apologies, but I can't make it this Saturday - a few too many things to do out west before the mothers day gathering on the Sunday :(
Negdriver
08-05-13, 08:35 PM
I may come up. Not doing anything as yet. But my right rear shock has been sheared off. If she isn't driveable ill have my own tooling weekend hear in Liverpool. :)
Sent from my iPhone using Tapatalk
I may come up. Not doing anything as yet. But my right rear shock has been sheared off. If she isn't driveable ill have my own tooling weekend hear in Liverpool. :)
Sent from my iPhone using Tapatalk
be good to catch up
Paul-JK
11-05-13, 08:20 PM
Thanks again guys for another great day. Really appreciate all of the help and hopefully I'll get a chance to help a few others out at the next toolbox day now that I've done all of the practicing on mine!
Wooders
12-05-13, 07:31 AM
A great turn out & I think it was overall a pretty productive day.
I'd specifically like to thank John for his assistance.
I'm open to suggestions for the next one but thinking about late June (depending on demand).
It was also great to see the number of members that came to help &/or socialise.
Happy to hear any feedback or suggestions on how we could make it even better.
Thanks Dave for hosting the day despite the lack of rest the night before.
We didn't help much as all hands were already on deck, so were just bumming around and catching up.
It was a good day and definitely a great learning experience through observations and discussions.
Thanks for your hard work and everyone for your tips.
Great day team. I'm looking forward to the next one.
Jason
Sorry all, life is a bit full on at the moment - barely got time to scratch myself with work and family commitments. I hope to get to one of these sometime.
dobbo56
16-05-13, 03:10 PM
A great turn out & I think it was overall a pretty productive day.
I'd specifically like to thank John for his assistance.
I'm open to suggestions for the next one but thinking about late June (depending on demand).
It was also great to see the number of members that came to help &/or socialise.
Happy to hear any feedback or suggestions on how we could make it even better. Dave, i was talking with Wolffy at the last meeting about the posabillity of having a Toolbox day on a sunday, for the guys who work on saturdays, i know i have a heap of things i need to do. Cheers Doggy Dave..................
I just wondering if there is any tool box day coming up any soon?
Wooders
23-07-13, 01:03 PM
Will be having another in a week or 2 - just need to get authorization from the boss first ;)
Will be having another in a week or 2 - just need to get authorization from the boss first ;)
Beauty! That 2" AEV spacer kit has been sitting here tormenting me for ages hehe - Just put the JKS discos on today (took a lot longer than 30 minutes though!) so want to get ready for more mods hehe
Will be having another in a week or 2 - just need to get authorization from the boss first ;)
Excellence looking forward to it.
There was a request for a sunday this time around
Wooders
24-07-13, 11:06 AM
Sunday 11th August?
Hows that sit with people?
dobbo56
24-07-13, 04:19 PM
Yep, put me down. Doggy Dave...
Sunday a good day. No work more people. I'm in for that one
Sunday 11th/08.... Yes, interested...... Will have one or two things to do by then...........
Sunday 11th August?
Hows that sit with people?
Where at????
Dave's not home man!
No good as you won't be there Dave!!!
Wooders
25-07-13, 03:31 PM
Firetruck.
Well I guess it's 18thAugust then - sorry people.
I'll create a new thread soon.
Firetruck.
Well I guess it's 18thAugust then - sorry people.
I'll create a new thread soon.
The 18th August would be better for me.
dobbo56
26-07-13, 04:45 PM
no problem, 18ths good for me. Doggy.
Ohh - even better! I might be able to get a snorkel to instal by then ;) This years tax refund is getting destroyed haha
I really need help with the air box to connect to snorkel and supercharger. I have no idea what to do. I probably need to buy part from Dave before hand.
Stick with AEV 2nd generation snorkel it is top quality and is a 4" diameter pipe as opposed to others that are just 3"
Negdriver
28-07-13, 09:53 PM
Damn it. Every time I pull the jeep apart, a tooling day at Wooders pops up. Lol. That's ok I got a tooling day this weekend coming. Just waiting for gaskets, gaskets and more gaskets to arrive.
Sent from my iPhone using Tapatalk
Negdriver
31-07-13, 10:22 PM
Forgot to mention. I've got a tooling day this weekend aug 3rd. Working on the engine so if anyone needs help with something I'm all ears. Near Liverpool. :)
No Wolfe. No green pants this time haha.
Sent from my iPhone using Tapatalk
redrubi
01-08-13, 05:45 PM
G-Day fellow jeep nuts!
Just a quick request!
Is any one from around the Holsworthy/Liverpool area going to the toolbox day & able to pick up some items from Wooders for me as I am unable to drive (spinal surgery)?
Rock sliders
PROCAL
Centre console armrest.
Can't travel too far!!!
Cheers
Andy:pirate:
dobbo56
01-08-13, 05:49 PM
I'll pick em up for you Andy, no worries. Doggy.
redrubi
01-08-13, 06:03 PM
Doggy Dave mate,
You are a true scholar & a gentleman!
Cheers
Andy
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.