The TRBN8R

[TRBN8R]

Hi All

This is my jeep

http://picasaweb.google.com/manmeet9574/MyJeep?authkey=Gv1sRgCJi2pbHsx7K5qAE&feat=directlink

JK Unlimited Auto Petrol Rock Red

Mods in Chronological order

1.GME TX1600 5W Handheld 2 Way
2. Assorted recovery kit
3. Staun Deflators
4. TJM air compressor
5. DIY Relocated rear Number plate + Reinforced front number plate mount
6. TJM 40mm Spring lift
7. JKS Sway bar disconnects
8.Mopar Recover points front + Rugged ridge hitch recovery point rear
9. 45 Ltr Lumina 3 way fridge
10. AEV Snorkel with a fish bowl on top
11. Narva 150 mm Windshield mounted driving lights
12. Quad fog light Special order Mopar front bumper
13. Spiderweb shadetop

Still to come in chronological order

1. 255/80/R17 BFG KM2s (Early 2011)
2. ARB Lockers front and rear (Mid 2011)
3. Mopar or similar front bar and ARB low mount winch (Still dont have the finances for but will definitely do it one day)


Cheers
Mani

[TRBN8R]

Here's the link to the pictures. And yes it is a special order Mopar bumper with 4 foggies. Only one supplied in Aus till date.

http://picasaweb.google.com/manmeet9574/MyJeep?authkey=Gv1sRgCJi2pbHsx7K5qAE&feat=directlink

[Hunty]

Hi Mani
Great pix - I Love the snorkel & fish bowl - who did the install and what did it cost ?
Cheers Hunty

[TRBN8R]

Thanks Hunty,

The snorkel cost $555 delivered from Jeepkonection. Its an easy DIY install will need about 2-3 hours if u want to do it. Best part is its a very clean, simple and non messy design with absolutely no pipes etc running thru the engine bay. Only thing u cut is the bonnet and no need to cut fenders, Firewalls etc. Just installed my new Quad foglight Mopar bumper this morning. Hope u noticed in the pics.

Mani

[reyzor]

looks good mani..... did you take the fotos? didnt recognise you in the reflection :P

[TRBN8R]

looks good mani..... did you take the fotos? didnt recognise you in the reflection :P

Yes Mate

I had just washed my hair so had no turban on.

[MOP44R]

Looks great mate… Now we need to head back to Rivo and give that gigantic water hole another go since you now have scuba gear ;D

[CraigB]

Hau Mani, haven't seen you for a while - I remember your Wrangler when it was 100% stock. Taking shape nice now. When are you gonna come on one of the trips so we can catch up again? Can you go to The Great Golden Eagle's Watto-wander-about?

CWCRB

[TRBN8R]

Hey Craig

Sorry mate I am working that weekend so cant attend Wattagans. My last trip was Ziggy in January. Unfortunately I had to pullout of the last three trips to Lake Lyall, Ziggy and Bylong. If everything goes alright I will be attending the Stockton trip next month. And hopefully more rock hopping trips too.

Mani

[TRBN8R]

2043

Nearing the end of the build.....

Bill Of Material So far:

40mm TJM Sprngs (2.5 inch in reality)
Bilstein Shocks (Kolak USA)
JKS Sway Bar Disconnects (From Miraz's Jeep)
AEV Control Arm Relocation Brackets(Quadratek USA)
Tom Woods Double Cardon Front Drive Shaft(Jeepkonection MLB)
RR Tow Hitch and Shackle Insert (Wooders)
RR Heavy Duty Ball Joints(Wooders)
Spicer Uni Joints(JMac Arndell Park)
Timken Wheel Bearing Hubs (EBay USA)
Mopar Front Bar (EBay Second Hand)
AEV Rear Bar with inbuilt 5 gallon Water tank(JeepKonection Mlb)
DIY Mud flaps (Bunnings+Super Cheap Auto)
Mopar Rock Sliders (From Tony Rich's Jeep)
AEV Snorkel(JeepKonection Mlb)
Brake Line Relocation Brackets (Bunnings)
Narva Driving Lights(4WD Action)
4 Cheap Look Good Lights (Super Cheap Auto)
RR Windshield Light Mount (Wooders)
33" Mickey Thompson MTZs(Jamboree Special)
Spiderweb Shadetop(EBay USA)
Mopar Bonnet and Grill cover(AJOR Second Hand)
5 Watt GME Hand Held Radio(TJM)
5 Watt Oricom Hard Mounted Radio(EBAY)
Window Shades(EBay USA)
Lumina 3 Way Car Fridge (Aldi)
and many other bits and pieces.......


Still to do eventually:

Eaton Rear Diff Locker
Front RCV Axles and reinforcement for the front diff (Probably when I break my front Axles)
Winch with AEV or RR XHD Front bar........

[SteveC]

Looks good.....

[Casper01]

hmm the list looks you are going to make something bigger.. But I am waiting for your work photos.. will you please post them if you don't mind. Thanks for sharing you thoughts and planing of work on your drive.

[SKIZZI]

Those 33s look bigger than normal ;)

[TRBN8R]

Those 33s look bigger than normal ;)

Just the angle probably.... They are actually 32.7"

Sent from my XT910 using Tapatalk 2