PDA

View Full Version : Suzuki 4WD member with new JK



Wallyd
01-12-09, 12:29 PM
G'day all, I've been in the zook club for around 5 years now and have traded my XL7 for a 2 door JK 3.8 manual.
I am looking into a simple dobinson 60mm lift and am enquiring about a tow bar/hitch.
How does the rear plate holder work with the bolt on hitch???
Also, any recommendations on a simply replacement bar for the front, I don't need a winch, so simple will do to get a better approach.
I shall be receiving the new car next week

Thanks

glend
01-12-09, 01:28 PM
Congratulations Wally. I would suggest for talking about all things JK, that you might benefit from attending our meeting tomorrow evening at the TJM branch at Seven Hills. Visitors are of course welcome.

PureCaboose
01-12-09, 02:29 PM
Hey Wally,

Are you the ribs wally with the white XL-7?

Greg Pointing
ex-Suzuki Club member, black XL-7 (sold)

Wallyd
01-12-09, 03:38 PM
Shhhhh, don't tell anyone I'm here

Steve F
01-12-09, 03:41 PM
Shhhhh, don't tell anyone I'm here


Ooooo, I've had your ribs up at the old club property on a working bee weekend :) Welcome, and welcome to the ribs :)

As for the JK question.... sorry cant help but I'm sure someone who can will be along shortly.

Cheers
Steve

Miraz
01-12-09, 04:19 PM
The rear plate is usually relocated to the side of the rear bumper using self tapping wood screws by the dealers - there are OEM and 3rd party kits to relocate it onto the spare wheel which keeps it up out of harms way.

The Rugged Ridge XHD bar seems to be pretty popular as a simple front bar

Wallyd
01-12-09, 06:04 PM
The Rugged Ridge XHD bar seems to be pretty popular as a simple front bar


Where are these sold in Sydney... they have a great range too, but how much do they hurt and are they air bag complient in Aus??

CraigB
01-12-09, 07:39 PM
Welcome Wally,
Post me if you want the websites info to score any gear for your JK.

CRB

Wallyd
03-02-10, 05:16 PM
http://i216.photobucket.com/albums/cc214/wallydwrd/Alicia%20s%20driver%20awareness%20at%20Wattagens%2 030%2001%202010/IMG_0014.jpg

http://i216.photobucket.com/albums/cc214/wallydwrd/Alicia%20s%20driver%20awareness%20at%20Wattagens%2 030%2001%202010/IMG_0016.jpg

TRBN8R
03-02-10, 05:22 PM
Welcome to Jeeping mate.

Just an advice invest $230 in JKS front sway bar disconnect. I bet the best $230 you will ever spend on ur Jeep.

Cheers
Mani

Wallyd
03-02-10, 05:26 PM
Yeah, I'm looking at those or the other more simple ones.... 2 pins on each side and remove the centre

sbadman
03-02-10, 05:35 PM
Bah disconnect, a ratchet and suitably sized sockets is how the real Jeepers disconnect :D

Wallyd
03-02-10, 05:40 PM
I did that for 6 years on my XL7, actuall had to also unbolt it from the chassis as it sat under the control arm.

Next is the tow hitch, then the Rancho adjustables, then the disconnects, then the front park bench must go!!!!

Very happy with its performance. The traction control worked great. I crossed right up in that shot, with both tyres in the air..... and just drove straight out!!!

Cpage66
03-02-10, 06:01 PM
I did that for 6 years on my XL7, actuall had to also unbolt it from the chassis as it sat under the control arm.

Next is the tow hitch, then the Rancho adjustables, then the disconnects, then the front park bench must go!!!!

Very happy with its performance. The traction control worked great. I crossed right up in that shot, with both tyres in the air..... and just drove straight out!!!


Good stuff...and I too, have been fortunate to have a good size helping of your ribs as well!!!!

Welcome!!!!

Wallyd
06-02-10, 05:49 PM
Well, here goes. I used some strut bolts and nuts I took off the old Suzuki. Bought some washers, a 5mm drill bit, and 3mm R pins. The idea is I finger tighten the nut, then run the pin so it dosen't come off. I'll see how it goes on and when time to come off, see how easy or not it is... ::) ::) ::)

Some thin light chain and hooks I had laying around and ta taaaaaa, disconnects.

When it rains, I get bored and do stuff!!!!

http://i216.photobucket.com/albums/cc214/wallydwrd/Miscellaneous/DSCF0027.jpg

http://i216.photobucket.com/albums/cc214/wallydwrd/Miscellaneous/DSCF0028.jpg

http://i216.photobucket.com/albums/cc214/wallydwrd/Miscellaneous/DSCF0029-1.jpg

http://i216.photobucket.com/albums/cc214/wallydwrd/Miscellaneous/DSCF0030-1.jpg

NT-Boy
06-02-10, 06:12 PM
Dont know about the thin chain, will that hold the sway bar linkage in place?

Still nice work...

Ive seen a JK owener blow his front tyre, when it rubbed on the linkage bolt. But he tyed the linkage to the sway bar, the tyre rubbed on full flex, yours is close to the chassi, so i think thats the idea.

Wallyd
06-02-10, 06:18 PM
The idea of the thin chain is that if it is going to get caught on something, it'll just let go and snap the chain without damaging anything else

NT-Boy
06-02-10, 07:01 PM
Dont get me wrong just tyring to help. :)

I know with my sway bar, when its diconnected and whatever is holding it lets go, the sway bar will drop, you dont want that to happen the sway bar can hit a rock and cause it to rotate. This has happend to a JK Last year i think.


Go see wooders, he gives club members a discount. :)

When you diconnect the sway bars, you'll love the way it flexs offroad, like the XJ's the JK's are great straight out of the box. i saw your JK at the last meeting looked like it had a lift?

Wallyd
07-02-10, 09:16 PM
Yeah, Dobinsons, 60mm front, 70mm rear. Ranchos to come soon...

Wallyd
28-02-10, 04:02 PM
Purchased hitch from Wooder for $142.30
Cut rego plate holder from scrap 2mm aluminium laying around.
Purchased licence plate light from Autobarn for $10.00
Used trailer cable I had laying around.
Purchased 7 pin plug from supercheap for $17.00

TOTAL $169.30.

Cheapest over the phone price for mopar kit.... $350

Saving of $180.70

http://i216.photobucket.com/albums/cc214/wallydwrd/Miscellaneous/IMG_0005-1.jpg

Wired up licence plate light via original lights, soldered and removed the globes from the priginal lights.

http://i216.photobucket.com/albums/cc214/wallydwrd/Miscellaneous/IMG_0004-1.jpg

Wired up and soldered the cables behind the left hand side light, and just bthe signal light from left hand side.

http://i216.photobucket.com/albums/cc214/wallydwrd/Miscellaneous/IMG_0002_1.jpg

7 pin plug is behind bumper.

Hitch pin slides in easily behind bumper and R pin clips in easily... stealth look was my approach

I don't like how it looks when they just cut straight across the bottom edge of bar.